Prolific Usb To Serial Driver Windows 10 Code 10 |BEST|
A code 10 error may arise because the chip you are using is not an original one. If you are using a fake, the manufacturer has a way of disabling it due to copy write infringement and the copy write takes effect once you download a recent update. To protect your PC from getting this code, you will have to make sure that your Windows 11/10 never updates a driver without approval. Updates come in the form of 64 bit and 32-bit drivers. Below we will show you how to work your way around the problem.
Prolific Usb To Serial Driver Windows 10 Code 10
In a word, code 10 error This device cannot start happens to the Prolific USB to Serial device drivers or the Realtek HD audio , it is proved feasible to try the solutions in this post accordingly on Windows 10.
The adapter you are referring to is not compatible with Windows 8, and even updating the drivers will not make it work either since it most likely has the old version of the Prolific chipset. A solution would be using an FTDI based USB-to-serial converter which has better drivers and is compatible with Windows 8.
The Prolific VID_067B&PID_2303 (PL2303 series) was the series of chipsets used. The chipsets was used on thier HP 280 G8 Microtower PC, HP 280 Pro G8 Microtower , HP 288 Pro G8 Microtower as well as the HP 290 G8 Microtower . You will note the Prolific USB to serial driver Windows 10 download below. This is the latest version. This is also a Prolific USB to serial driver Windows 10 64-bit driver. Its 32bit as well as 64bit.
You will note again that the Prolific USB to serial driver will need you to look at the chipset as well as the operating system. As you can see that Windows 8 does have its issues. So look at your pl2303 driver operating system version. The rtool in this driver cannot detect the HXA/XA chip in Windows 8 and above. This could very well be your problem when you cannot detect the hardware.
The prolific usb to serial is very prolific (literally) devices that you find in many other equipment. There are drivers on this website for other drivers with issues. Use the search bar on the side to find the others if you dont have a pl2303 device but a different chipset series. There are a few on this website alone. Download the latest driver below. If it fails on your device. Come back and download the older version in the middle of this page, the 2015 one. Till I see you then ? See also the Prolific USB to Serial Comm Port as well as the Prolific USB to Serial Comm Port Driver.
Guaranteed CompatibilityWindows 7 Compatible 32-bit and 64-bitFully Serial / RS232 compatibleWe proudly boast about our 99% device compatibility ratio with this product! We also stand behind it. You may see others that look like ours, but ours comes with a driver for Windows 7, 32-bit as well as 64-bit.Commercial qualityOur USB to Serial Adapter Cable is used mainly by AV pros and other industrial techs. This cable works great to add a serial port to your new laptop that didn't come with one, and will allow you to work on equipment just like you used to with your old laptop. Easy SetupSetup is quick and easy. Just plug it in, pop in the driver disk, and be done within a minute or two. We've also included driver downloads on our site in case you want to try those with your current non-functioning adapter.Getting a Code 10 Error on your USB to Serial device? You don't have the correct driver chosen. You'll need to choose the 2008 driver, version 3.3.2.102 to correct the problem. Download the correct version below. If you purchased it from us, you can use our toll free tech support. We're native English speakers and are here Monday-Friday.DownloadsHow to fix a Code 10 ErrorWindows 7 Drivers, 32bit and 64bit (Latest Drivers)Windows XP Drivers (Latest Drivers)Mac Drivers (Latest Drivers)Prolific drivers site2009 VersionVista DriversWindows Drivers 2007 versionWindows Drivers 2003 versionMac DriversMac OS 10.3 DriversLinux DriversManual
Hi, I recently had the driver issue with a Prolific USB to serial cable on windows 10, this website proved to be very informative -usb-to-serial-fix-official-solution-to-code-10-error Apparently the info there is sourced from I hope this heIps
Can i get remote access to your pi and connect with my windows test machine. I want to trace the crash and i can do it from my windows machine.Email your details to mail [at] virtualhere.com thanks, i think if i can reproduces where its crashing with the prolific there is a good chance i will be able to fix. 350c69d7ab